In this article, you Have to download the Xiaomi 13T PRO 5G Flash File Firmware stock ROM. you can repair your smartphone using this flash file, tools, or USB driver. here you will find the driver, flash tool, and flash file folder in a zip file. If you don’t know how to flash the Xiaomi 13T PRO 5G phone then read this page carefully step by step. and also we will try to help you at our best.
Contents
What is Stock Firmware:
Refers To The Version Of The Operating System That Comes Pre Installed On The Device By The Manufacture. It is An Unmodified Version OF The Flash File/Firmware That Is Distributed With A Device And Can Be Used To Restore It To Its Original State.
Advantages of Firmware:
- If your device is dead, you can be unbricked using the Stock ROM file
- You can Fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Xiaomi 13T Pro 5G
- You can fix the boot loop issue on Xiaomi 13T Pro 5G
- Fix Unfortunately; the app has stopped errors on Xiaomi 13T Pro 5G
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot the Xiaomi 13T Pro 5G
- To Reset or Remove FRP on your device:
- Restore Xiaomi 13T Pro 5G to Factory State
Pre-Requisites:
- This Flash File is for Xiaomi 13T Pro 5G.
- You should have a working Windows PC/Laptop
- Download and Install the latest Xiaomi USB Driver for Windows and MAC.
- Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
- Charge your phone to at least 50% before upgrading your phone.
- Take a complete backup of your phone data
Download Xiaomi 13T Pro 5G Flash File
How To Flash Xiaomi 13T Pro 5G Via Xiaomi Flash Tool:
- Download Xiaomi 13 Pro Flash File And Tool
- Extract the File And Tool
- Move the flash file folder to the desktop (recommended)
- Then open the tool and select the file in the tool
- Connect To PC By Shorting Eel Point
- Click refresh in the tool
- Click on the flash button
- Wait till the process completed
- All done.
How to Flash Xiaomi 13T Pro 5G Firmware Via SP Flash tool:
- Unpack downloaded Firmware using 7zip
- Install the Mediatek Vcom driver on Your computer
- Disable SLA Authentication by following this Guide (if not disabled You may face a BROM error)
- Download and extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like the below image (option/connection)
- Go to the Download tab Click Scatter and Load Scatter File from the ROM folder
- Repeat the Process and load the DA and Auth files too
- From the drop-down Select ‘Download only‘
- Click ‘Download’
- Turn the Phone OFF, Press the Volume up + down key, and insert the USB, Once Phone detected Immediate Release keys (make sure your phone is stable in the device manager)
- You will see a Yellow flashing bar with a flashing Process. once done, unplug the device and switch it ON
