Lava Yuva 3 Pro LZX414 Flash File Stock Firmware Download

In this article am sharing with you the Latest Lava Yuva 3 Pro LZX414 Flash File. If you want to Flash Your smartphone lava LZX414 and want to download lava Firmware Files. then you have come to the right place. here you can download your favorite Stock Rom.

Lava Yuva 3 Pro LZX414 Flash File

Lava Yuva 3 Pro was launched on 14th December 2023. The phone comes with a 6.50-inch, 90 Hz refresh rate touchscreen display. Lava Yuva 3 Pro comes with 8GB RAM and is powered by an octa-core Unisoc T616 processor. The Lava Yuva 3 Pro runs Android 13 and is powered by a 5000mAh non-removable battery.

This firmware can help u if you are facing logo hag, restarting, FRP lock, Pin Pattern Lock, Dead after the wrong Flash File, and other Software Problems on your mobile Device.

Lava Yuva 3 Pro Overview

The phone is powered with an Octa-Core Unisoc T616 Processor. It supports 8GB and 128GB RAM, with UFS 2.2 storage for apps and media files. Additionally, the phone has 8GB RAM and expand memory up to 16 GB. The Phone comes with Android 13 and can receive Android 14.

Lava Yuva 3 Pro is based on Android 13 and has 128GB of inbuilt storage. that can be expanded via a microSD card (up to 512GB) The Lava Yuva 3 Pro is 165.00 x 76.10 x 8.70mm (height x width x thickness) and weighs 200.00 grams. It was launched in Desert Gold, Forest Viridian, and Meadow Purple colors.

Lava Yuva 3 Pro packs a 50-megapixel camera on the rear. It has an 8-megapixel single front camera. Lava Yuva 3 Pro includes Wi-Fi 802.11 b/g/n/ac, Bluetooth, and USB Type-C with active 4G on both SIM cards. The Lava Yuva 3 Pro supports both face unlock and fingerprint sensors.

Advantage of Stock Firmware Files:

Here are the answers to why you need to download the Lava Yuva 3 Pro LZX414 flash file on your computer.

  • You can unbrick using the Firmware file
  • You can repair the IMEI on your device with the Stock ROM
  • Remove any malware or Adware Lava Yuva 3 Pro
  • You can fix the boot loop issue.
  • Fix Unfortunately app has stopped
  • Fix Network Related Problems
  • You can unroot Lava Yuva 3 Pro
  • To Reset or Remove FRP
  • Delete Pin, Pattern Lock.
  • Restore Lava Yuva 3 Pro LZX414 to Factory State

Firmware Information:

  • Device Name: Lava LZX414
  • ROM Type: Full ROM
  • SoC: unison
  • OS: Android
  • Password: Null
  • Root Access: No
  • Firmware Version:

Download Lava Yuva 3 Pro LZX414 Flash File

  • LZX414_

Pre Requirements:

  • Device lava Yuva 3 Pro
  • At least 50% battery charge
  • SPD Flash Tool
  • USB Driver

How to install Firmware on Lava Yuva 3 Pro LZX414

  • Download the Latest SPD Flash Tool.
  • Now, install a Spreadtrum driver. You must have the latest version of the SPD driver.
  • Download stock Rom according to the needs of your cellphone.
  • Run the Spreadtrum tool. [.exe]
  • After that, connect your Mobile.
  • After your Android device is connected,
  • select the PAC/PAC5 file
  • Now, click/select then “Start Download”
  • After that, follow the instructions and continue flashing.
  • You will receive a green message.

Finally, your cellphone will reboot automatically. It takes a few minutes to reboot.

More Firmware

LEAVE A REPLY

Please enter your comment!
Please enter your name here